Exterior Wood Care Products
For Fences, Decks and Siding

Key Features

• Unique water-borne finish penetrates and bonds to the hardest exotic woods, such as Ipé, Mahogany, Ironwood and Teak
• Unlike an ordinary wood stain, CWF® Hardwoods is specifically formulated to work with dense hardwoods where penetration of the stain is critical
• Premium UV-absorbing pigments protect against moisture and sun damage
• Rich finish brings out the natural beauty of exotic hardwoods
• Available in pre-mixed Natural and Cedar tones or can be tinted to several other wood stain colors
• Provides a mildew-resistant finish
• Easy soap and water cleanup

Recommended For

• Exterior use only
• All types of exotic hardwood species
• Exterior hardwood decks, fences, siding and furniture

Application Tips

• New wood requires time to dry out and open pores before finishing. To test, pour a cup of water on a horizontal wood surface. If it is absorbed into the wood within 30 seconds, it is ready to be finished.
• Surfaces must be clean, free of dirt, grime, mildew and previous coatings.
• Sand new hardwood surfaces with 80-grit sandpaper to improve penetration.
• Weathered, uncoated surfaces: clean with Flood WOOD CLEANER prior to coating.
• Previously coated surfaces: remove finish with Flood WOOD STRIPPER prior to coating.
• Allow wood to dry 48 hours before finishing.
• If applying with a roller or sprayer, always backbrush.
• Apply between 50° F - 80° F.

Available Sizes

• 1 gallon
• 5 gallon

Coverage

• 150 - 200 sq ft/gal (13.9 - 18.6 sq m/gal)
• Coverage will vary depending on the type, age and texture of the wood.

Dry Time

• 24 - 48 hours, depending on temperature and humidity

VOC

• Does not exceed 275 g/L

Note: Color accuracy will vary based on monitor and printer calibrations. Please visit your local Flood dealer to view actual color samples before making a final color decision.